NEWTON Natural 60×60 by Ecoceramic. Rectified porcelain Full-Body tile with concrete effects. Natural matt finish. Each piece measures 60×60 cm. and there is 4 piece per box (1.44 sq. m.). 1st QUALITY
Colors: WHITE, PERLA, SILVER, SMOKE y GRAPHITE
NEWTON Natural 60×60 by Ecoceramic imitates low-worked cement, with irregularities and tool marks.
Ecoceramic has adapted the printing techniques with high-result designs that achieve spectacular imitation realism.
These very realistic techniques, copy even the defects of the original parts and are able to print them making them seem even more real.
This format has different variations in the design so that it is impossible to find the repetition
NEWTON Natural 60×60 by Ecoceramic is manufactured on top-quality Full-Body rectified porcelain. This deployment of media in the design is accompanied by the best material.
Full-Body porcelain uses the same material for the entire tile, both the exposed and the back part, the tiles are made in one piece, they do not have two parts.
This makes the pieces very resistant to impacts on the face.
With NEWTON Ecoceramic has entered to remain in the group of manufacturers of large formats, without neglecting the smaller ones that give solutions for all the rooms.
This series offers a range of formats like no other to be able to adjust to everyone’s needs and, together with the color gamut, make it a reference series.
The high pressure procedures in the manufacture of porcelain make it a super material due to its strength and hardness.
It can also be installed outdoors because it does not absorb water and is not affected by freezing or high temperatures.
It also supports all household cleaning chemicals without problems.
All these features allow us to install this series in any part of the house, kitchens, bathrooms, and rooms, and in public places of high requirements for materials
You can watch the complete series or buy samples by clicking HERE
This item is served in 7 business days.
To calculate the boxes, divide the square meters of surface between those in each box and add 10% for the cuts.
Finally, in the “Documentation” tab you have the collection file at your disposal.