C2TES1 tile adhesive Flexible by FERBALCA – Especially for facades

Ferbalca

C2TES1 tile adhesive Flexible by FERBALCA. Cementitious adhesive of mixed binders and high adhesion, special for facades, for laying low-absorption ceramics indoors and outdoors.

White color and 25kg bag.

17,61 10,56 IVA Incluido

C2TES1 tile adhesive Flexible by FERBALCA. Cementitious adhesive of mixed binders and high adhesion, special for facades, for laying low-absorption ceramics indoors and outdoors.

White color and 25kg bag.

DESCRIPTION:

C2TES1 tile adhesive Flexible by FERBALCA is a cementitious adhesive according to UNE EN 12004 as C2TES1.

In addition to this, it is a cementitious adhesive with mixed binders, which also has high adhesion, reduced slip and also extended open time.

Especially recommended for the installation of facades, large format ceramics, floors with heavy traffic and floors with underfloor heating.

It can also be used in swimming pool linings, for cold rooms and for laying new flooring on top of an existing one.

No sagging and has excellent initial adhesion, in addition, it is a glue cement with a high open time that allows rectifications.

SUPPORTS:

Suitable for conventional supports, plasters and mortar floors.

Laying on laminated plaster partitions.

Also for indoor and outdoor application for flooring or wall cladding.

The supports must be firm, also resistant and clean of dust

Do not use on plaster or paint.

PRECAUTIONS AND RECOMMENDATIONS

Do not apply with risk of frost or rainy weather, or with temperatures below 5ºC or above 30ºC.

If the temperature or wind conditions are extreme, drying occurs faster than normal, reducing open time.

The maximum weight of the tiles on vertical surfaces is 40kg. When facades are installed, mechanical anchors must also be used when:

Be a format greater than 2400 cm2
One side of the piece measures more than 60cm.
Weigh more than 40Kg / m2.
The installation is more than 3 m. Tall

The approximate consumption is 4 to 5 kg per m2 for simple gluing and 7 to 8 kg. per m2 for double gluing.

Here you can find other installation materials

Brand

FERBALCA

FERBALCA es una marca especializada en cementos que se fundó en 1992 en Algemesí, provincia de Valencia.Además su objeivo ha estado claro desde el primer momento: la calidad del producto para convertirse en "La marca del especialista".Actualmente diversificados alrededor del cemento, cubren todas las necesidades del profesional de la construcción.FERBALCA fabrica cementos de gran calidad especializados por usos con una relación calidad precio como pocas.En azulejos Neicone elegimos dos de sus productos estrella:Cemento cola PORCELANICO FLEXIBLE C2TECemento cola FLEXIBLE C2TES1
Ferbalca
Weight25 kg
Dimensions50 × 30 × 20 cm

Documentación

Ficha técnica PAM Ecogel PORCEL C2TE

Reviews

There are no reviews yet.

Be the first to review “C2TES1 tile adhesive Flexible by FERBALCA – Especially for facades”

Your email address will not be published. Required fields are marked *